 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Marketing Bulletin DATE: TO: FROM: RE: September 20th, 2006 All Sales Personnel Mark Stoner Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective September 20th, 2006: Series EC14 Description 5V 4 pad SMD Plastic Oscillator Recommended Replacement EP14 or EH14 In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after March 31st, 2007, with delivery to conclude by September 30th 2007. If there are any questions pertaining to this bulletin, please fell free to contact me. Thank you again for your cooperation. Best Regards, Mark W. Stoner Vice President of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234 EC14 Series * Plastic surface mount package * 5.0V supply voltage * HCMOS/TTL output * Stability to 50ppm * Available on tape and reel EC14 H 4.7 L 14.0 W 9.8 OSCILLATOR OBSOLETE ELECTRICAL SPECIFICATIONS Frequency Range (MHz) Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Frequency Tolerance / Stability* Input Current Inclusive of Operating Temperature Range, Supply Voltage, and Load <30.000MHz 30.001MHz to 50.000MHz >50.000MHz Load Drive Capability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Duty Cycle Rise Time / Fall Time Aging (at 25C) Tri-State Input Voltage No Connection VIH :2.0VDC VIL :0.8VDC Start Up Time Period Jitter: Absolute Period Jitter: One Sigma 1.000MHz to 26.000MHz 26.001MHz to 66.667MHz <53.125MHz >53.125MHz w/TTL Load w/HCMOS Load w/TTL Load w/HCMOS Load at 50% of waveform w/HCMOS Load at 1.4VDC w/TTL Load at 1.4VDC w/HCMOS Load or w/TTL Load 20% to 80% of waveform w/HCMOS Load; 0.4VDC to 2.4VDC w/TTL Load 5ppm / year Maximum Enables Output Enables Output Disables Output: High Impedance 4 mSeconds Maximum 10 mSeconds Maximum 100pSeconds Maximum 25pSeconds Maximum 1.000MHz to 66.667MHz 0C to 70C or -40C to 85C (<30.000MHz) -55C to 125C 5.0VDC 10% 100ppm Maximum or 50ppm Maximum (0C to 70C Only) 23mA Maximum (Unloaded) 35mA Maximum (Unloaded) 50mA Maximum (Unloaded) 10TTL Load or 50pF HCMOS Load 15pF HCMOS Load 2.4VDC Minimum VDD-0.5VDC Minimum 0.4VDC Maximum 0.5VDC Maximum 50 10(%) (Standard) 50 5(%) (Optional) 8 nSeconds Maximum IOH = -16mA IOH = -16mA IOL = +16mA IOL = +16mA MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC14 PLASTIC 5.0V OS33 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC14 00 SJ ET T TS - 25.000M TR FREQUENCY TOLERANCE / STABILITY 00=100ppm Maximum (Standard) 45=50ppm Maximum OPERATING TEMP. RANGE Blank=0C to 70C ET=-40C to 85C DUTY CYCLE Blank=50 10(%) (Standard) T=50 5(%) MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel (Standard) FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State Enable High OBSOLETE SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Tri-State Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage Tolerances = 0.1 TAPE A 24 .3 B 11.5 .1 C 10.75 .1 D 4 .2 E 2.1 REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1,000 F 12 .2 G B0* H 1.5 +.1-0 J A0* K .3 .1 L K0* *Compliant to EIA 481A R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Seal Integrity Solderability Marking Permanency Shock Vibration Specification Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum (internal crystal only). Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Random drop on hard wooden plate 3 times from a height of 20cm. Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. CATEGORY SERIES PACKAGE VOLTAGE Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC14 PLASTIC 5.0V OS33 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EC14
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |